Arduino Full Stack
  • Preface
  • Part 1 - Introduction
  • Chapter 1. Getting Started with Arduino
    • 1.1 Arduino UNO R3
    • 1.2 LVR Arduino Exntesion Board
    • 1.3 Sensor Kits for Arduino
    • 1.4 Race Car Chassis Model
    • 1.5 Arduino Online Resource
    • 1.6 Arduino IDE for Prototyping
    • 1.7 FIRST Arduino Project - Hello World
  • Chapter 2. Programming Grammar
    • 2.1 AVR C
    • 2.2 Digital IO
    • 2.3 Analog IO
    • 2.4 More About IO
    • 2.5 Time Functions
    • 2.6 Interrupt Functions
    • 2.7 Communication Classes
    • 2.8 Arduino Libraries
  • Part 2 - Sensors
  • Chapter 3. LED Sensors
    • 3.1 LED Blinking
    • 3.2 LED SMD RGB
    • 3.3 Mini LED Red Green GND-Shared
    • 3.4 LED RGB GND-Shared
    • 3.5 Photoresistor
    • 3.6 LED Light Cup
    • 3.7 LED Red Green GND-Shared
    • 3.8 LED 7 Colors
  • Chapter 4. Infrared Sensors
    • 4.1 Infrared Emitter and Receiver
    • 4.2 Laser Emitter
    • 4.3 Infrared Remote Control
    • 4.4 IR Obstacle Avoidance
    • 4.5 IR Line Tracking
  • Chapter 5. Audio Sensors
    • 5.1 Passive Buzzer
    • 5.2 Active Buzzer
    • 5.3 Microphone Big Sound
    • 5.4 Microphone
  • Chapter 6. Magnetic Sensors
    • 6.1 Hall Magnetic Sensor
    • 6.2 Mini Reed
    • 6.3 Linear Hall Magnetic Sensor
    • 6.4 Reed
    • 6.5 Analog Hall
  • Chapter 7. Touch Sensors
    • 7.1 Tap Sensor
    • 7.2 Shock Sensor
    • 7.3 Touch Sensor
  • Chapter 8. Thermist Sensors
    • 8.1 Temperature Sensor - DS18B20
    • 8.2 Analog Thermister
    • 8.3 Digital Temperature
    • 8.4 Temperature and Humidity Sensor
  • Chapter 9. Switches
    • 9.1 Button
    • 9.2 Switch -Mercury Tilt
    • 9.3 Switch - Ball
    • 9.4 Relay
  • Chapter 10. Other Sensors
    • 10.1 Joystick
    • 10.2 Flame
    • 10.3 Pulse Monitor
    • 10.4 Rotary Encoders
  • Chapter 11. More Discussions on Sensors
    • 11.1 Arducam
    • 11.2 IMU - BNO055
  • Part 3 - Motors
  • Chapter 12. Motors
    • 12.1 DC Motor
    • 12.2 AC Motor
    • 12.3 Stepper Motor
    • 12.4 Servo Motor
  • Part 4 - Display
  • Chapter 13. Display
    • 13.1 Nixie Light LG5011B
    • 13.2 Crystal Display 1602A
    • 13.3 Crystal Display 12864
  • Part 5 - Communication
  • Chapter 14. Communication
    • 14.1 Serial
    • 14.2 Wifi - ESP8266
    • 14.3 Bluetooth
    • 14.4 Integrate Wifi & Bluetooth - ESP32
  • Part 6 - Arduino Based Mini Automated Vehicle
  • Chapter 15. Assemble a Mini Automated Vehicle
    • 15.1 4-Wheel DC-Motor Driven
    • 15.2 Arduino UNO and LVR Arduino Extension Board
    • 15.3 Speed Sensors
    • 15.4 Servo Motor for Pan Tilt Control
    • 15.5 Tracking Sensor
  • Chapter 16. Remote Control
    • 16.1 IR Remote Control
    • 16.2 Bluetooth Remote Control
    • 16.3 Wifi Remote Control
    • 16.4 Automatic Control
Powered by GitBook
On this page
  • Hardware Wiring
  • Sketch
  1. Chapter 3. LED Sensors

3.2 LED SMD RGB

Previous3.1 LED BlinkingNext3.3 Mini LED Red Green GND-Shared

Last updated 7 years ago

  • LED: light-emitting diode

  • SMD: surface-mount device

  • : An SMD LED Module (surface-mount device light-emitting diode module) is a type of LED module that uses surface-mount technology () to mount LED chips on printed circuit boards ().

Hardware Wiring

Sketch

int redpin = 11;  //select the pin for the red LED
int bluepin =10;  // select the pin for the  blue LED
int greenpin =9;  // select the pin for the green LED

int val;

void setup() {
  pinMode(redpin, OUTPUT);
  pinMode(bluepin, OUTPUT);
  pinMode(greenpin, OUTPUT);
  Serial.begin(9600);
}

void loop() 
{
  for(val=255; val>0; val--)
  {
    analogWrite(11, val);
    analogWrite(10, 255-val);
    analogWrite(9, 128-val);
    delay(1); 
  }
  for(val=0; val<255; val++)
  {
    analogWrite(11, val);
    analogWrite(10, 255-val);
    analogWrite(9, 128-val);
    delay(1); 
  }
  Serial.println(val, DEC);
}

The code can be found at .

Examples_Arduino - sensor-kit-for-arduino - _008_LED_SMDRGB - _008_LED_SMDRGB.ino
SMD LED
SMT
PCB
LED SMD RGB