Arduino Full Stack
  • Preface
  • Part 1 - Introduction
  • Chapter 1. Getting Started with Arduino
    • 1.1 Arduino UNO R3
    • 1.2 LVR Arduino Exntesion Board
    • 1.3 Sensor Kits for Arduino
    • 1.4 Race Car Chassis Model
    • 1.5 Arduino Online Resource
    • 1.6 Arduino IDE for Prototyping
    • 1.7 FIRST Arduino Project - Hello World
  • Chapter 2. Programming Grammar
    • 2.1 AVR C
    • 2.2 Digital IO
    • 2.3 Analog IO
    • 2.4 More About IO
    • 2.5 Time Functions
    • 2.6 Interrupt Functions
    • 2.7 Communication Classes
    • 2.8 Arduino Libraries
  • Part 2 - Sensors
  • Chapter 3. LED Sensors
    • 3.1 LED Blinking
    • 3.2 LED SMD RGB
    • 3.3 Mini LED Red Green GND-Shared
    • 3.4 LED RGB GND-Shared
    • 3.5 Photoresistor
    • 3.6 LED Light Cup
    • 3.7 LED Red Green GND-Shared
    • 3.8 LED 7 Colors
  • Chapter 4. Infrared Sensors
    • 4.1 Infrared Emitter and Receiver
    • 4.2 Laser Emitter
    • 4.3 Infrared Remote Control
    • 4.4 IR Obstacle Avoidance
    • 4.5 IR Line Tracking
  • Chapter 5. Audio Sensors
    • 5.1 Passive Buzzer
    • 5.2 Active Buzzer
    • 5.3 Microphone Big Sound
    • 5.4 Microphone
  • Chapter 6. Magnetic Sensors
    • 6.1 Hall Magnetic Sensor
    • 6.2 Mini Reed
    • 6.3 Linear Hall Magnetic Sensor
    • 6.4 Reed
    • 6.5 Analog Hall
  • Chapter 7. Touch Sensors
    • 7.1 Tap Sensor
    • 7.2 Shock Sensor
    • 7.3 Touch Sensor
  • Chapter 8. Thermist Sensors
    • 8.1 Temperature Sensor - DS18B20
    • 8.2 Analog Thermister
    • 8.3 Digital Temperature
    • 8.4 Temperature and Humidity Sensor
  • Chapter 9. Switches
    • 9.1 Button
    • 9.2 Switch -Mercury Tilt
    • 9.3 Switch - Ball
    • 9.4 Relay
  • Chapter 10. Other Sensors
    • 10.1 Joystick
    • 10.2 Flame
    • 10.3 Pulse Monitor
    • 10.4 Rotary Encoders
  • Chapter 11. More Discussions on Sensors
    • 11.1 Arducam
    • 11.2 IMU - BNO055
  • Part 3 - Motors
  • Chapter 12. Motors
    • 12.1 DC Motor
    • 12.2 AC Motor
    • 12.3 Stepper Motor
    • 12.4 Servo Motor
  • Part 4 - Display
  • Chapter 13. Display
    • 13.1 Nixie Light LG5011B
    • 13.2 Crystal Display 1602A
    • 13.3 Crystal Display 12864
  • Part 5 - Communication
  • Chapter 14. Communication
    • 14.1 Serial
    • 14.2 Wifi - ESP8266
    • 14.3 Bluetooth
    • 14.4 Integrate Wifi & Bluetooth - ESP32
  • Part 6 - Arduino Based Mini Automated Vehicle
  • Chapter 15. Assemble a Mini Automated Vehicle
    • 15.1 4-Wheel DC-Motor Driven
    • 15.2 Arduino UNO and LVR Arduino Extension Board
    • 15.3 Speed Sensors
    • 15.4 Servo Motor for Pan Tilt Control
    • 15.5 Tracking Sensor
  • Chapter 16. Remote Control
    • 16.1 IR Remote Control
    • 16.2 Bluetooth Remote Control
    • 16.3 Wifi Remote Control
    • 16.4 Automatic Control
Powered by GitBook
On this page
  • Hardware Wiring
  • Sketch
  • Assignments
  1. Chapter 13. Display

13.1 Nixie Light LG5011B

PreviousChapter 13. DisplayNext13.2 Crystal Display 1602A

Last updated 6 years ago

Hardware Wiring

Sketch

//set IO to control each piece. Please refer to the official definition of LG5011B.
int a=7;
int b=6;
int c=5;
int d=11;
int e=10;
int f=8;
int g=9;
int dp=4;

//Display digit 1
void digital_1(void)
{
  unsigned char j;
  digitalWrite(c,LOW);  //light up c
  digitalWrite(b,LOW);  //light up b
  for(j=7;j<=11;j++)    //turn down others
    digitalWrite(j,HIGH);
  digitalWrite(dp,HIGH);//turn down dot point
}
//Display digit 2
void digital_2(void)
{
  unsigned char j;
  digitalWrite(b,LOW);
  digitalWrite(a,LOW);
  for(j=9;j<=11;j++)
    digitalWrite(j,LOW);
  digitalWrite(dp,HIGH);
  digitalWrite(c,HIGH);
  digitalWrite(f,HIGH);
}
//Display digit 3
void digital_3(void)
{
  unsigned char j;
  digitalWrite(g,LOW);
  digitalWrite(d,LOW);
  for(j=5;j<=7;j++)
    digitalWrite(j,LOW);
  digitalWrite(dp,HIGH);
  digitalWrite(f,HIGH);
  digitalWrite(e,HIGH);
}
//Display digit 4
void digital_4(void)
{
  digitalWrite(c,LOW);
  digitalWrite(b,LOW);
  digitalWrite(f,LOW);
  digitalWrite(g,LOW);
  digitalWrite(dp,HIGH);
  digitalWrite(a,HIGH);
  digitalWrite(e,HIGH);
  digitalWrite(d,HIGH);   
}
//Display digit 5
void digital_5(void)
{
  unsigned char j;
  for(j=7;j<=9;j++)
    digitalWrite(j,LOW);
  digitalWrite(c,LOW);
  digitalWrite(d,LOW);
  digitalWrite(dp,HIGH);
  digitalWrite(b,HIGH);
  digitalWrite(e,HIGH); 
}
//Display digit 6
void digital_6(void)
{
  unsigned char j;
  for(j=7;j<=11;j++)
    digitalWrite(j,LOW);
  digitalWrite(c,LOW);
  digitalWrite(dp,HIGH);
  digitalWrite(b,HIGH);   
}
//Display digit 7
void digital_7(void)
{
  unsigned char j;
  for(j=5;j<=7;j++)
    digitalWrite(j,LOW);
  digitalWrite(dp,HIGH);
  for(j=8;j<=11;j++)
    digitalWrite(j,HIGH);
}
//Display digit 8
void digital_8(void)
{
  unsigned char j;
  for(j=5;j<=11;j++)
    digitalWrite(j,LOW);
  digitalWrite(dp,HIGH);
}
void setup()
{
  int i;    //Define variable i
  for(i=4;i<=11;i++)
    pinMode(i,OUTPUT);  //set pins 4~11 as output
}
void loop()
{  
  while(1)
  {
    digital_1();    //digit 1
    delay(2000);    //delay 2 seconds
    digital_2();
    delay(2000);
    digital_3();
    delay(2000);
    digital_4();
    delay(2000);
    digital_5();
    delay(2000);
    digital_6();
    delay(2000);
    digital_7();
    delay(2000);
    digital_8();
    delay(2000);   
  }
}

Assignments

How to display digits 9 and 0 on LG5011B?

Nixie Light LG5011B